| Frequency |
| Range | R&S®SMBV-B103 | |
| | CW mode | 9 kHz to 3.2 GHz |
| | I/Q mode | 1 MHz to 3.2 GHz |
| | R&S®SMBV-B106 | |
| | CW mode | 9 kHz to 6 GHz |
| | I/Q mode | 1 MHz to 6 GHz |
| Setting time | SCPI mode, ALC state ON, CW mode | <3 ms |
| | SCPI mode, ALC state ON, I/Q mode | <5 ms |
| | SCPI mode, ALC state Table | <2 ms |
| | SCPI mode, ALC state S&H | <7 ms |
| | List mode | <1 ms |
| Level |
| Maximum output power | 1 MHz < f = 6 GHz | >+18 dBm (PEP) |
| Absolute level error | 1 MHz < f = 3 GHz | <0.5 dB |
| Additional level error with ALC OFF, S&H | This mode is used with I/Q modulation and pulse modulation. | <0.25 dB |
| Output impedance VSWR in 50 O system | 200 kHz < f = 6 GHz | <1.8 |
| Setting time | SCPI mode, ALC state ON, CW mode | <2.5 ms |
| | SCPI mode, ALC state ON, I/Q mode | <5 ms |
| | SCPI mode, ALC state Table | <2 ms |
| | SCPI mode, ALC state S&H | <7 ms |
| | List mode | <1 ms |
| Reverse power | 1 MHz < f = 1 GHz | 50 W |
| | 1 GHz < f = 2 GHz | 25 W |
| | 2 GHz < f = 6 GHz | 10 W |
| Spectral purity |
| Harmonics | f > 1 MHz; CW, level = 8 dBm | <–30 dBc |
| Nonharmonics | CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz | <–70 dBc
(nominal <–85 dBc) |
| SSB phase noise | 20 kHz carrier offset, 1 Hz measurement bandwidth, CW | |
| | f = 100 MHz | <–141 dBc
(nominal –147 dBc) |
| | f = 1 GHz | <–122 dBc
(nominal –128 dBc) |
| | f = 6 GHz | <–106 dBc
(nominal –112 dBc) |
| Wideband noise | attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW | <–142 dBc
(nominal –152 dBc) |
| Supported analog modulation modes |
| Amplitude modulation | | standard |
| Frequency/phase modulation | | standard |
| Maximum FM deviation | f > 3 GHz | 16 MHz |
| Maximum fM | f > 3 GHz | 160 rad |
| Pulse modulation | | optional,
with R&S®SMBV-K22 |
| On/off ratio | | >80 dB |
| Rise/fall time | 10 % to 90 % of RF amplitude | <20 ns, typ. 4 ns |
| Minimum pulse width | using the optional
R&S®SMBV-K23 pulse generator | 10 ns |
| I/Q modulation |
Supported systems
(with additional options) | R&S®SMBV-B10 baseband generator required | GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n, Bluetooth®, GPS, HD Radio™3), XM Radio, DVB-H/DVB-T, multicarrier CW |
| Realtime custom digital modulation | R&S®SMBV-B10 baseband generator required | ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM |
| I/Q modulator bandwidth | internal | 60 MHz or 120 MHz, depending on baseband option |
| | external | >500 MHz |
| Maximum waveform length | 32 Msamples |
| | with R&S®SMBV-B55 option | 256 Msamples |
| DAC resolution | | |
| ACLR | WCDMA 3GPP FDD, TM 1/64 | typ. 67 dBc |
| EVM | WCDMA 3GPP FDD, TM 1/64 | typ. 0.6 % |
| | WiMAX IEEE 802.16e | typ. 0.4 % |
| | EUTRA/LTE | typ. 0.4 % |
| Connectivity |
| Remote control | | IEC/IEEE, Ethernet (LAN), USB |
| Peripherals | | USB 2.0 |